Error message here!

Hide Error message here!

Forgot your password?

Error message here!

Error message here!

Lost your password? Please enter your email address. You will receive a link to create a new password.

Error message here!

Back to log-in

Close

About The Author

Profile photo of skunkpharmresearch

This is the head cheese's account

Related posts

0 Comments

  1. Connorbis

    Very informative, thank you both for the time and consideration put into such research. I am only sixteen and these topics of conversation seem seldom and not discussed enough imo, the public is very innovative as you say, a kind way of dismissing mistakes commonly made through trial and error of these common practices.

    Reply
  2. Chris Lizotte

    you just saved my health a ton! As I have been blasting onto my green silicon pad for months and I've noticed the center getting mush and weak. I just have had bad experience blasting into Pyrex 8 by 8 pans - if the pan had 4" high sides than 2" is love it , I wouldn't get any blow by around the edges. Is love to buy one of your mats.

    Reply
  3. Chris Glazier

    ive seen the damage of spraying directly to silicone pads (baking sheet) myself. The chunks of "rubber" came out from between the weave/threads leaving little round (rubber) balls in my final bho product. Im now wondering about the solid type silicone baking pans. like 8x8 but solid instead of weave? Maybe spray into water in the pan and then separate after most of the off gassing is done. Freezing the bho on the pyrex dish does make it simpler to scrape but still sticks some.

    Reply
  4. Z Gharib

    I just graduated in April with a ACS certified bachelors of science in chemistry from the University of Pittsburgh. I've been missing lab. To fill that hole in my heart I've attempting some of your extractions and getting fantastic results. I love the in depth chemical detail you provide. I looked up this article after practically injuring myself attempting to scrape last night's extraction of my pyrex plate. I figured a non stick silicon container would save me a lot of effort. As soon as I read the word "swelling" in this article I was like DUH. I flashed back to organic lab where our instructor had discussed this observation in detail. I love that this article made me recall my lab days. I would love to come work for you guys btw! Make awesome extracts, run them through some high powered instruments (GC-FID for example), and then high five everyone if it's over 90%. I'm serious though, I have my resume ready. Zeyead Gharib

    Reply
  5. Greg

    I recently purchased the oil slick sheets. Which it claims its a laboratory grade PTFE 100% resistant to non polar solvents. Which I'm just wondering if you have tested any of this product? Also weather it would be recommended to use this product threw the vacuum stage?

    Reply
  6. Paul Leonard

    A simple $2 dollar pyrex dish is all you fucking need, quit being stupid people. If theres even a question on safety or health of it why use it when there is something out there already that is cheaper and 100% clean and used by all the professional BHO makers. PYREX people, its that fucking simple.

    Reply
  7. 6 The Dangers of Silicone Mats in the Oven

    […] Remember, silicone is safe enough to place in the human bodies. Millions of women each year use silicone breast implants to fill out where nature left deficits. If you can trust silicone in your body, you can certainly […]

    Reply
  8. C4h10

    Has anyone found actual traces of silicone in their BHO from lab testing? I see a lot of people saying its unsafe but it would be nice to see some real test results. Maybe a side by side test of a run with Pyrex only and one blasted onto parchment paper?

    Reply
    1. bcizzo

      I used to get oil from someone, would randomly find small pieces of clear rubber in it, noticed later that he had silicone pads he was spraying onto. idk if that was silicone but it sure seems like it. for anyone concerned, i now make my own concentrates, vac purged only blast onto pyrex outside etc.

      Reply
    2. Carl Boone

      I only had problems with some of the silicon getting into my product when I was stupid enough to use a razor blade to scrape. Other than that, I have used it several times, and have come out with some extraordinary wax. However, after reading this article I will go back to Pyrex. It is better to be safe than sorry.

      Reply
  9. DY

    Would silicone pads be suitable for the final step of solvent winterization, for ethanol evaporation? Or will there be the same reaction that butane has? It seems as if an oil slick pad would be much more useful for collecting absolutes than a razor blade and pyrex, but I wouldnt want to try it if there was an adverse reaction

    Reply
    1. DY

      I checked the cole palmer site, and I noticed there was a similar comment in this thread, but I only say this because oil slick claims their pads are"impervious to alcohol"

      Reply
  10. Willbur

    What are your thoughts on blasting onto ptfe roll like they have on aqua labs? It says it's 100% non-polar solvent resistant. I've been using them off and on for about a month now and have had great results. Since it's a micro weave some oils can seep through the paper but it's less than would be left in the corners of a pan. Any thoughts on spraying onto a solid ptfe sheet vs. a micro weave? Thanks.

    Reply
    1. skunkpharmresearch

      PTFE is resistant to both polar and non polar solvents and I see no issues with it, other than you do not want to scrape any of it into your oil or wax and combust it, as one of the byproducts is Hydrofluoric Acid.

      Reply
  11. Michael

    Do u think i can spray directly onto organic parchment? If not do you think i can spray on a pyrex and while its in liquid form pour it onto it?

    Reply
  12. johnny

    hey bro you should make an instagram you have some amazing knowledge about oil there is alot of shatter heads on there that would love input from an expert like yourself......if you make one follow me an my girl @thedankcouple

    Reply
  13. felipetrece

    so, they said that tygon 3350 is suitable with butane? they said they r going to send it to u to try? how big r the pads? and how much do they cost?

    Reply
  14. tony

    My version 2 oilslick jus came in I know its bad to blast on to directly so can I use it to purge in my chamber instead is it safe? Gonna do a run sooon

    Reply
      1. Michael

        Dude i don't think so. When i did it in my vac oven i noticed it did something weird to the pad. It looked like it came off a little or something.

        Reply
        1. ConcentrateCharlie

          I agree with this 100% even after scraping from the pyrex it still would remove a bit of the silicone unless u waited to scrape after heat purging for like 12-20 hours

          Reply
  15. dan

    Hi there, RI patient here. I have been spraying into parchment for about 2 years now with great success. I only use "beyond gourmet" brand parchment because they do not coat their parchment with silicone. They use some type of acid wash to make the paper smooth. I would like to hope this is safe to do, and that I have not been harming myself, however I do not really have the means to test it. I would appreciate your input on the subject. Thanks, Dan

    Reply
      1. benji

        Hey, I was wondering if you guys have tried using the butane as a carrier? I've been using "Slick Sheet PTFE roll" and using it as an insert in my vac oven. After properly reduced we pour the extraction onto the pre-heated slick sheet. The remaining butane bubbles out and once it settles after about half an hour I begin the vac-ing process. The slick sheet i find superior to pads because they are disposable and are completely resistant to non-polar solvents. It makes the whole process cleaner and easier for myself. I was curious if anyone else does it this way? Thanks, Ben

        Reply
    1. beandipwashere

      To clarify the Beyond Gourmet brand of parchment I've seen some online vendors label it as silicone free, however per the vendors website it's chlorine and quilon free and is silicone coated. Per what I've read above it still doesn't make it safe if I understand correctly.

      Reply
  16. bryant

    Hi Greywolf, Thanks for the helpful information! Time to start using my old slick pads as coasters. I had a question, is it safe to spray butane through the column directly onto parchment paper? I've heard multiple opinions on both side. Thanks!

    Reply
  17. K

    Interesting. I haven't sprayed onto my oilslick, however I am using it to evaporate an alcohol extraction. Do you think this is OK?

    Reply
      1. az buds

        Just did my first co2 run and was having trouble with removing the alcohol. Spread some of it on a pad I used to vac my bho runs (it was clean, so I thought). The stuff on the pad never set up, and turned dark, like a bho run. Tasted like bho also.

        Reply
        1. homer

          CO2 oil I've seen has all been dark. Could just my experience. Lab tested at 70+% THC on most of it. Quite tasty from what I sampled.

          Reply
Join the conversation!
  or